Low water pressure after plumbing repair

Low water pressure after plumbing repair. Sometimes it may cause the problem that you got low water pressure from your drain after you have the plumbing repair in your house and that thing will happen with your all drains in your house.

It is not a big problem to be get worried there are many causes behind the low water pressure or there will be some problems in your pipe that may cause this problem and low the water pressure.

Low water pressure after plumbing repairLow water pressure

There are the following problems Which are the reasons behind your low water pressure and you may get aware of them easily. These Steps or reasons are as follow:

  • Water meter

Sometimes it happens due to your water meter. In every house, there is two major controlling water which are shutoff valves that are used to control all the water pressure of the house.

And if you have the plumbing repair and after that, you got the problem of less water pressure it will surely mean that your water meter is not fully open and you have to check your water meter valves and turn it full on and you can solve your problem easily.

  • Valve open

Sometimes it happens due to leftover the valves closed you have to open the valve because it plays a big role in the water pressure if you have the wheel handle valve then it will full in the clockwise direction and if you have the lever handle to have to make sure that it should be on the parallel side which will make than fully open and will not indicate the water pressure.

If you have recently repaired your pipes or anything and your water pressure is less than before there will happen because your valves are not fully open.

  • Pressure Regulator

Sometimes you may get a problem with your pressure regulator or you can say that your water pressure regulator fails.

A pressure regulator does the work to control all the valves and help to reduce the water input pressure in it so that your pipes will not get any damage this only happens in very less houses and if it gets fails it may cause a serious problem to your reduction of the water pressure.

But you do not need to take tension you only need to concern with a good plumber who will solve your problem instantly.

  • Old pipes

Another reason behind the less water pressure will be the old steel water pipes. It happens when you got corrosion in your steel pipes which does not let more water go through them and may block the way of water from inside.

This is only caused by the old pipes and if you want to get rid of them you only need to repipe the pipes which have corrosion in it and exchange.

It with copper or plastic pipes which will not cause corrosion in it easily and it will be good if you use only copper pipes.

  • Leaking of pipeLeaking of pipe

The other main reason for the low water pressure is the leaking of pipes.

Sometimes there are some leaking spots which are in front of you but sometimes there will be some leaking underground or outside of your house.

First, you have to figure out the Leaking spot of the pipe and for the instant fix you have to turn the main supply of the water off and you have to dry the pipe from the outside.

And use any patch the rubber around it or use the electrical tape for the instant repair and you will easily solve your problem and if the leaking spot is big and it cannot be controlled by the tape then you have called the plumber.

Conclusion

Hope that after reading these steps you will be easily get rid of it and by following these steps there will easy for you to solve your problem and will be easy to maintain the water pressure again to its original pressure. These are very easy and helpful steps for you to be followed and for less water pressure, these steps would worth it.

Related Guides

Leave a Comment