Faucet dripping after water turned off

Faucet dripping after water turned off. A dripping faucet not only disturbs but can cost you a waste of hundreds of dollars in terms of running water.

Several reasons could cause faucet’s dripping. With the annoying leaky faucet in the sink, water-wasting won’t easily go away even if you turn the handle hard.

The faulty faucet head (seal inside the faucet head) can cause the faucet leakage after the water supply is turned off. The other possible factors could be corrosion, fault in the spout, O-ring’s problem, and sometimes washers.

Faucet dripping after water turned offFaucet dripping after water turned off

This fault can be related to a damaged seal inside the head, a faulty O-ring, or sometimes a defective washer. Even the water pressure of your water supply can cause faucet dripping. Valve seats and damaged cartridges are also among the possible reason for water dripping from the faucet.

Damaged cartridge

If you have hot water (connected with a water heater) and cold-water handles, this type of valve comes with a faucet cartridge.

The cartridge-style Faucet has valves to control the flow of water. A fault in the cartridge could be the reason for dripping water.

Replacing the damaged cartridge with a new one would be the best solution to get rid of water leakage.

Water pressureWater pressure

Sometimes the dripping of water occurs due to water pressure. If the faucet body handles to move a certain way.

This is because of your house’s water pressure. You can fix the problem by adjusting the water pressure of your home water supply.

A faulty O-Ring

O-ring is a small disc that holds the handle of the Faucet, with a stem screw. Often it happens when an O-ring gets loose or worn out it resulting in water leaking from the faucet.

A Faulty O-ring can fix the problem by replacing the O-ring with a new one.

Malfunctioned Washer

A washer is resting against the valve seat, with the time washers get worn out due to friction.

If the washer is of variant size or is not installed properly, it causes your water to drip from the leaking faucet.

Valve seat

If the leakage is coming from the spout, this could be a problem with the valve seat. check if the water is dripping from the spout, try to replace the valve seat.

If you have plumbing knowledge, you can fix it yourself, or contact a plumber.

How to determine the type of Faucet

You can determine the type of Faucet installed in your bathroom by checking the user manual.

The most commonly used faucets at home are Cartridge faucets, ball faucets, disc faucets, and compression washer faucets.

Cartridge faucet

Cartridge faucet

The most commonly used faucet in every bathroom is a cartridge faucet. This faucet has two handles mostly.

This cartridge controls the flow of water by moving the handles up and down. The cartridge inside the sink operates up and down directions to manage the flow of water.

Ball faucet

A ball faucet uses a ball joint to manage the control between hot and cold-water lines. A ball faucet comes up with a single handle located at top of the faucet spout.

Pushing up and down helps in adjusting the water pressure as per your need, and left and right options are for controlling the temperature. This type of faucet is commonly used in a kitchen faucet.

Compression washer faucet

This Traditional/ oldest type of faucet is still commonly used in today’s era. The best thing about this faucet is that it uses rubber washers to control water flow.

The handles can only slide without any up and down movement. The best characteristic of the compression faucet is, it allows you to feel when the faucet gets tighter while shutting it off.

Disc Faucet

It is a lit bit expensive but one of the best types of newer faucets is a disc faucet. The Disc Faucet is more durable and reliable as compared to standard faucets.

The structure of the disc faucet is such as the lever sits atop a cylindrical body.


Related Guides

Leave a Comment