Septic tank concrete lid replacement. Septic tank concrete lid is a vital part of the septic systems but it demands protection from damage.
A damaged concrete lid is of no use for your septic tank. Septic tank lid prevents the odor and sewage from invading your ground. There are several reasons you choose to replace the septic tank lid, it can either be due to a damaged lid or for beautifying your home.
You may also require to change the septic tank lid when it starts growing cracks. You can purchase these lids online or at a home improvement store near your house. Keep reading to find the best method to replace the septic tank lid.
Septic tank concrete lid replacement
Here are the three main reasons you may want to replace the septic tank concrete lid. These are damaged lids, the lid gets cracks, and for the home decoration purpose.
The lid is worn down
The great feature of the Septic tanks is their longevity, but it’s not the same for the septic tank lid. When the septic tank lid gets older they start getting worn, and sometimes it may fall in the septic tank.
Servicing your Septic tanks helps to increase their longevity, while servicing the tanks inspect the lids for any cracks or signs of worn.
The tank lid is damaged
The first reason for replacing the lid of the tank is the damaged or cracked lid. When the lid is damaged it’s better to replace it.
There are several reasons your tank lid gets damaged, for example, a movement of the car over the septic tank lid can damage it. Or it may be because of activity in the yard.
It depends on how you placed the lids, if they are too close to the surface, they may get cracks with a hit while digging some areas in the yard.
To beautify the house
Replacing the septic tank’s lid is not only confined to the damage or worn-down lids. But you may also change the lids to enhance the aesthetic look and beautify your house.
Imagine you have spent a lot on the improvement of your garden or home but the lids are still that old-fashioned, and it impacts a lot on the look of the area. Bringing a new concrete lid to the area is pretty good and easy.
Steps for septic tank concrete lid replacement
Find and dig down to the septic tank
The very first step is to identify the location of the septic tank lid. Most commonly the lids are around 16 inches under the surface.
If it is installed in risers no need to dig down. Use the sharp shovel to dig the area, for easy lifting dig the area 2 inches wider than that of the diameter of the tank.
Remove the lid
Before proceeding further to this step put on your protective clothing like a mask, and gloves. Take a putty knife and pry the bar to pull out the lid. Ask your friend for assistance in taking out the lid.
Now remove the seal with the putty knife. The seal will come out in the hunks and clean the area with a brush.
Take the pry bar and try to slide in from one side. Push the prybar down and ask your friend to pull the lid by holding the handles firmly.
Take measurements and purchase a new one
Take the measurements of your septic tank lid in terms of length and width. After taking measurements cover the septic tank opening with a suitable cover or tarp.
Purchase the new lid according to the measurements you took earlier. The newer lid should be the same in length and width as the old one.
Install the new lid
Take your new lid with the assistance of a friend. Carefully place the new lid at the opening of the septic tank. Apply the seal and cover it with the soil. For a concrete lid, you may need a professional.
Conclusion
Concrete lid plays an important function in the septic systems, it prevents sewage and odor from entering into the ground. Unlike septic systems, the septic tank lid has a limited life span. Septic tank lids can get cracked, or fully damaged, and sometimes they do not fit with the aesthetic beauty of your home. Replacing the lids helps to get rid of these problems and factors.
Related Guides
