Belt keeps coming off riding mower. It is a very frustrating situation to see the belt that keeps coming off riding the mower when you cut the grass on the lawn. You can not do your work with full tempo when the belt is creating issues frequently.
You can not cut the grass on the lawn in less time if you have to refix the belt that keeps coming off after some time. There are different reasons beyond this problem like
- Brackets are damaged
- Idler spring is worn out
- Brackets are worn out
These are some common causes behind this belt that keeps coming off issue. You are here then; it means you are facing this issue, so don’t get worried because this informative article will surely help you to solve the issue.
Belt keeps coming off riding mower
A riding mower machine is good to have in the home to cut the grass and gives your landscaping a new shape. However, it demands regular maintenance and fuel change because if you do not maintain and replace the faulty components, the machine will start to disturb you.
The same is the issue with the mower. If the brackets are worn out, you can not work with the full flow, so read the following points because I described each in detail about each point.
Belt is loose
If the mower belt keeps coming off, then, first of all, check whether it is loose or tight. Sometimes, when you are mowing on an uneven surface, the different parts become loose. The same is the case with the belt, so if it is loose, then tight fix it, so it does not come off again.
The belt is worn out
The belt is an integral part of the mower, so if your machine is too old. Check that the belt is worn out due to an overload of work. You can inspect the sign of cracks on the mower, so if it is damaged, you have to change it with a new belt so that it does not come off again.
If your mower is new, you can skip this point because the new belt does not wear out quickly.
Brackets are damaged
The riding mower has a tightener bracket that keeps the idler pully in a straight line. The idler pulley and spring are attached to each side of the bracket.
The mower belt starts to come off if the brackets or spring is damaged and not holding its place. If you have some skills, you can replace the damaged component, but if you don’t know, don’t try to open the screws because a slight mistake can damage the machine.
So, you contact a skillful professional to repair the damaged part and change the belt.
Idler spring is worn out
Idler spring is also one of the reasons for this issue. So, if there is no issue with brackets, check the idler spring, then replace it to finish the belt issue that keeps coming off.
Dust and debris
Dust and debris is also the leading cause of this issue. The riding mover’s belt requires proper tension to hold yot mower belt from falling. Dust and debris can obstruct this tension when thrust on the belt.
So, when you finish mowing the lawn, clean it properly and remove the debris, dust, and grass from each part of the machine.
Removing the debris and grass is crucial for the machine and your safety. If the mud or grass dries on the belt or any other part, it can also catch fire, which is very dangerous for you. So, clean the mower immediately when you finish your job.
Conclusion
The article concludes that if your belt keeps coming off while riding mower, stop using the machine and check all the parts mentioned in this article.
If the belt is loose or worn out, then replace it. Then check the brackets and idler springs; if they are damaged, change them.
Remember one thing if you are highly skillful, try to open the screws of the mower because it is a complex machine. You can hire an expert to look at the issue in detail and fix the problem.
Related Guides
