How to use dishwasher with broken soap dispenser

How to use dishwasher with broken soap dispenser. A machine is all about a combination of elements that gives you incredible results by lessening your regular tasks and saving you time.

Like other appliances, a dishwasher helps eliminate dirty dishes without putting you into the procedure. But it can worry you if the detergent or soap dispenser is faulty.

A broken soap dispenser is not a severe fault that can poke you to replace your dishwasher. You can reuse your dishwasher after replacing the broken part.

But if you see a bundle of dirty dishes, but the dishwasher soap dispenser got faulty, then you can calm yourself. You can wash dishes in the dishwasher with a broken dispenser until it can’t get replaced.

A Way For How to use dishwasher with broken soap dispenser

A dishwasher can’t work efficiently if the detergent dispenser gets faulty; you may need to rewash the dishes after taking them out of the dishwasher with a broken detergent dispenser.use dishwasher with broken soap dispenser

But if your dishwasher soap dispenser is not faulty and you want to wash dishes free of grease, dirt, and oil, then you can follow the following article’s guidelines.

Method#1. Pour Detergent Into the Dishwasher Directly

The first easy way to use your dishwasher with a broken soap detergent is to put the soap or detergent directly in the dishwasher before starting its wash cycle.

Usually, when you run a normal wash cycle, it consists of four steps. The first is soaking dishes in water to loosen the dirt from the dishes. In the second step, the dishwasher drains the pre-wash dirty water and pours the clean one.

It releases the detergent in the primary wash cycle and cleans the dishes. The third step is to splash the clean water to remove the suds from the plates, and the last step is to dry the dishes.

The following method, where you will put the detergent in the dishwasher, doesn’t require running the normal cycle as it will drain the detergent after the pre-wash cycle.

So, it would help to run the quick wash cycle after pouring the detergent or soap into the dishwasher. The quick wash cycle skips the pre-wash step and will start washing dishes from the 2nd step.

The only negative point is if the dishes contain hard stains, then the quick wash cycle may not be enough for it as it has not applied the pre-wash method to soften the stains. But if it’s not dried, then you may tension-free follow it.

Method#2. Add Detergent & Run a Normal Cycle

The dishwasher contains various body structures as well as features based on models. So, you can follow the instructions if your dishwasher contains a dispenser closer to the soap holder that usually doesn’t have a lid.Add Detergent & Run a Normal Cycle

It usually contains soap that melts in a pre-washing cycle of the dishwasher. The holder’s lid usually stays close to save the soap from dissolving in the middle of the pre-washing cycle.

So, it can be opened when the pre-wash cycle ends and drains out the previous water. When the dishwasher completes the pre-wash cycle, it allows you to open the lid.

So you can stop the dishwasher and can add the pods by hand. Rerun the dishwasher to complete its wash cycle. After the wash step, the dishwasher stops and releases the water.

It will rinse water and then will finally do the drying procedure. The procedure will surely give you the results of a usual wash cycle. The only disturbing point in some models is that they don’t show a completed pre-wash cycle.

Method#3. Use Of Gel Detergent in Detergent Dispenser

Another situation you can face is if your detergent dispenser is malfunctioning and moderately unfolds the door; you may consider using the gel detergent available in the market.

Because the halfway unfolded detergent dispenser won’t let the detergent come out, so to cope with the fault, you can choose the gel detergent and can run a normal wash cycle to wash your dirty dishes with a broken dispenser.

As the door is not open fully, it can help your dishwasher preserve the detergent while running the pre-wash cycle and save enough stuff for washing.

While following this step, you must consider some factors to give a delicate wash to your dishes. It includes the pouring quantity of the detergent and how much the door is opened; a narrow opening is preferable.

Method#4. Using Detergent Pods

If you have suspected the dispenser door is closed fully and can’t be used in any way, you can also appropriately wash the dishes without consuming detergent in the pre-wash step.

So, for the following purpose, you are required detergent pods that are the detergent encapsulates in a plastic sheet. It would be better to pick detergent pods with acceptable sheet density.

It will help them to keep safe in the wash cycle and will not release the detergent until the wash cycle begins. So the only thing you need to do is to place dishes and the detergent pods somewhere in the washing department.

When you run the dishwasher, the detergent pods will survive in the pre-wash cycle, and when the wash cycle begins the until the sheet will dissolve, and the detergent will be utilized where required.

The method is much easier for washing dirty dishes in a dishwasher with a broken soap dispenser. Just place detergent pods and run a normal cycle.


The following article will help you introduce the different methods you can use to wash dishes if the dishwasher soap dispenser is faulty.

You can go with any of them, but we recommend you call a pro for repair or replacement. As using the dishwasher with a broken dispenser prolonged is not an intellectual decision.

Related Guides

Leave a Comment