How to remove gorilla glue from plastic. Gorilla glue has stronger adhesive bonds than other glue types.
Gorilla glue holds things together strongly it needs extra care because it’s hard to remove gorilla glue from unwanted surfaces.
Even it’s harder to remove the gorilla glue from the plastic surface material. Gorilla glue creates a stronger adhesive bond with the plastic material and becomes stubborn to loosen.
But it’s not impossible to remove gorilla glue from a plastic surface, you can do it by having a good understanding of how to remove gorilla glue from the plastic material. Follow the procedures mentioned below to get rid of gorilla glue.
How to remove gorilla glue from plastic
To remove gorilla glue from the plastic surface, use a damp rag with alcohol, acetone, or mineral spirits. But the best solution is to remove gorilla glue when it’s in the wet form.
Rub the surface where glue is stuck with a damp rag and wipe off. Use the knife to remove glue and then apply some lubricant to soften the gorilla glue.
Wipe off all the surfaces to remove residue of gorilla glue.
Five easy ways to remove gorilla glue from plastic surfaces
Take an immediate reaction to gorilla glue
if you find the gorilla glue on any plastic material surface, take immediate action. Wipe off the surface with a clean paper towel or cloth.
The bad thing about gorilla glue is that it absorbs moisture from the air and changes its shape from liquid to hard solid.
it’s better to remove the gorilla glue in a wet form otherwise it’s quite hard to remove from plastic surfaces.
Gather all tools and cleaning products
there are some necessary tools that you should have to remove gorilla glue from the plastic surface.
Take a bucket/bowl to prepare a solution of the water and soap or a good cleaning solution.
There are some good cleaning agents and glue removal products such as acetone, alcohol, mineral spirit.
Take a soft cotton swab or old pieces of cotton cloth. Paper towel is also good to use.
Sometimes the glue is stubborn and will not come easily, so take a good sharp knife or chisel. Sometimes a lubricant is recommended use to make the plastic soft.
Apply the cleaning liquid solution to the glue surface
Take a bucket or bowl and add some liquid cleaning solution to it, mix the cleaning liquid with water.
Mix the ingredients well so that the soap dissolves in water. Take a cloth and dip it inside the liquid solution.
Apply the liquid solution to the surface with glue. Wrap a plastic sheet over the area and leave it for hours. If you leave it without wrapping the sheet the glue will not soften.
Use the glue removing liquids
Alcohol is considered to be one of the best solutions to remove gorilla glue from the plastic surface.
Rub alcohol over the gorilla glue with a cloth or some cotton swab. When you rub alcohol over the glue it will dissolve the glue.
Mineral spirit is another best agent for removing glue from plastic surfaces.
Acetone is also used but you need extra care because using acetone over polystyrene plastic can damage the plastic.
Use a wet rag to remove the dissolved gorilla glue
Take a rag and make it wet, and wipe the gorilla glue from the surface with the rag. One important thing to consider is to use the rag in one direction only.
After wiping off the glue with a rag you will see the glue has gone. Repeat the process if the glue is not going off apply alcohol again.
You can also use a sharp object such as a knife to remove the hard glue but don’t apply extra force it may damage the surface.
Conclusion
Gorilla glue doesn’t come off the plastic surface easily, put extra care while applying gorilla to any plastic surface. Acetone is a good agent to remove gorilla glue from any material. But with some plastic materials acetone is not good to use.
Alcohol can be used for plastic material surfaces, and there are other mineral spirits to remove gorilla glue from the plastic material. The best solution is to remove gorilla glue when it’s wet otherwise, you may damage the surface.
Related Guides
