Ge dishwasher force drain cycle

GE dishwasher force drain cycle. GE dishwasher is an electrical appliance used to wash the dishes and utensils in a quick time. You can save a lot of time and energy because it is very tiring and time-consuming.

However, if you do not use it properly and install a lot of dishes inside the dishwasher shelves to wash in one cycle to save the water and cleaning agent, it can be worse for you.

If you see a water pool in the base of the dishwasher, it means the unit is not drawing the water, and there is an issue with the unit due to which water is not clearing from the dishwasher basement.

Some common reasons of the GE dishwasher are these.

  • Clog in the sump pump
  • Blockage in the drain pipe
  • The sewerage line is clogged
  • The drain impeller is damaged

These are some common causes of drainage issues in the dishwasher, so if you are watching the water pool in the dishwasher, keep reading the article to find the solution to fix this problem.

GE dishwasher force drain cycle

If you have a GE dishwasher in the kitchen to wash the dishes and you are facing a water drainage problem in the unit, it means you are not taking care of your appliance and using it, not according to the manual.

When you enter the dishes into the dishwasher for a clean cycle, remove all the remaining food items on the plates because these large pieces of food waste are difficult to clear from the drainage pipe and are stuck in the hose to stop the water from clearing.

One more thing to keeping mind is not overload the dishwasher with dishes and pots because when you enter a lot of dishes in the dishwasher, then it becomes difficult for water to get its way out of the dishwasher.

Clog in the sump pump

If the water is not draining from the basement, check the large pieces of food waste near the sump pump area. If you find food waste, pull them out to clear the water.

Inspect the drain pipe where it attaches beneath the sink for a twist or clogs in the pipe. If you found any clog, then clean it.

Check the kitchen sink for blockage; if you have installed the garbage disposal, clear it by running water into it to clear the pipe.

Blockage in the drain pipe

When you do not remove the food waste in the dishes, these food prices are gathered in the drain pipe and blockage.

So it is necessary to clear the food waste from the plates before you enter them into the dishwasher for the clean cycle.

If you see a water pool in the dishwasher due to blockage in the drain pipe, take vinegar and mix it with hot water in a bucket, run this water solution into the drain pipe, and wait for twenty minutes.

After twenty minutes, run the freshwater bucket into the dishwasher, and you will see the drain pipe is clear from the clog.

The drain impeller is damaged

The primary purpose of the drain hose impeller is to force water through the drain pipe into the sewerage line. If it becomes faulty, the drain pump needs to be changed.

You can not replace the faulty drain pump because it is a complex unit, and you can not replace the drain pump impeller, so take the services of a certified specialist to replace the drain hose impeller so that water starts to clear from the dishwasher.

Too much detergent

When you wash the dishes in the dishwasher, ensure not to overload them with dishes because if you enter extra dishes and pots, you will have to add too much detergent to the dishwasher to clean the dishes.

When you add too much detergent, it makes many suds that make it difficult for the water to drain.

So make sure to install fewer dishes in the dishwasher for one clean cycle so that you need to add less detergent powder.


The final words on this discussion are that if your GE dishwasher is not draining the water completely and it seems like a pool in the basement, the main reason behind this issue is a clog in the sump pump hose and drain line.

Ensure to remove the food waste from plates when entering them into the unit to wash cycle.

Using too much detergent makes a lot of sud in the unit, which makes it difficult for water to drain, so do not overload the unit with a lot of dishes to prevent the blockage of sud in the drain hose and drain line.

Related Guides

Leave a Comment