Sunbeam heated blanket blinking. The sunbeam has heated blankets, which are very useful in the areas where the season is mostly cold, like Canada and other countries which have the cold season throughout the year.
These blankets have a battery system and charge with the electricity, and there are some lights on their control pad. When any issue occurs, you have to clear the issue you are facing.
All these lights have their functions, and they blink or flash when we have their need. But if they blink without function, this is the issue’s symbol.
Sunbeam heated blanket blinking
Sunbeam heated blanket blinks their lights, but they blink only on their functions; otherwise, when they blink without their use. They show that there is some issue behind them.
Continuous blinking lights indicate the issue, so let’s see the reasons behind the blinking. But before telling the reason, you must know about the lights.
F2 is flashing
The problem is with the flashing light f2. The keys or the button, you may say, are all pre-programmed things; there is the programming behind them.
They only blink when they face an issue about their work. The f2 light is designed as it blinks when the blanket is not receiving electricity.
This may be due to the issue in the power switch, which means this is not connected correctly, and another thing is that it releases electricity, but the electricity does not reach the blanket to heat it.
When this light blinks, you can come to know that the issue is with the connection or the pad displaying that light.
FF flashing
Another light is the FF light; this light, when flashing, also indicates the problem, and this is the big problem, and this is also flashed when the light is not reaching the blanket.
This indicates that the light is not reaching the blanket, and you must reset or check the blanket to see what the issue is.
Check all the ways to stop the FF light blinking; if it does not set with that, you have to reset the device and check. Resetting is the best way to handle these types of things.
Reset was the best option when you tried all the tricks continuously, but when there is no impact on the blanket, reset the blanket and then check; reset is the solution to the problems which are significant and not solved by you.
Red light
Red light is always the risk symbol, which means issues with the internal components, wires, and many others.
Some wires are not concerned with the heating; they are designed for other purposes, but due to the fault, they heat up more and maybe start burning in the blanket control board.
When you see the red light blinking, you must check or sniff whether any smell is inside the blanket.
When you see this, you have to turn the power off, remove the switch from the outlet, and check whether this is blinking now or not. I hope this light stops blinking now, and then you should open the board and check and correct the issue.
E light
An E light flashes when the thing that is not good for the heating is in the blanket. Some things that are not suitable for the blanket are too in the blanket when it is heating.
These lights blink when these types of things are in the blanket, preventing the blanket from heating. When this light flashes, you get alert and remove this thing for the excellent heating.
F1 light
This light flashes when the switch is plugged into the socket and the heating pad is attached to the blanket, but the issue occurs with them that do not allow the heat to reach and heat the blanket. This is an indication of the non-secure connection between both these.
Related Guides
