How to fix a lawn mower pull cord. A lawn mower helps maintain lawn decoration by cutting the grass quickly. But different things can make things frustrating, such as a stuck or worn-out pull cord of a lawn mower.
If the pull cord of the lawn mower break, then you will not be able to fix it until you don’t fix it. Well, the issue with the pull cord is not a rare case and is repairable without having a tough time.
If you are facing the same issue and looking for the steps to help you, we are here with our best guidelines to make your tough time more manageable. So, here you go.
How To Fix a Lawn Mower Pull Cord Easy Method
In the following guideline, you will be able to tackle the pull cord of your lawn mower. Even if the cord is stuck or damaged, you may get assistance for both issues of the pull cord.
A lawn mower starts when you pull the cord. The pulling cord allows the hub to rotate attached to the crankshaft. The rotation urges the electromagnetic connection to turn on the spark plug.
At the same time, the combustion chamber gets the gas forced by the carburetor. The gas ignition makes the engine start functioning, allowing the lawn mower blades to rotate.
The section contains the cord attached to the motor through a recoil spring. The recoil spring retracts the cord whenever you pull it. So, it clarifies the importance of the pull cord for taking some work from the mower.
If it somehow gets wear or tear, you have to fix it if you want your machine to work as it was before. So follow the step given below.
Step 1. Required Material
To proceed with the steps for repairing or untangling the pull cord of your lawn mower.
- Screwdriver
- Needle Nose Plier
- A Lighter
- Wrench
- New Cord (in case of replacement)
- Gloves
- Goggles
Step 2. Initial Thing To Do
Firstly, you need to place your machine on a level surface. If it is placed on a slop, it would be better to move it to a suitable place. You may also consider placing obstacles with the mower’s wheels if it is placed on a slope. It will help to keep the mower in one place.
Step 3. Detach the Spark Plug Cord
Now, as a safety precaution, it would help to take out the spark plug cable to do the work more safely. Detaching the spark plug cord will disable the machine from getting starting unintentionally.
Step 4. Locate Recoil Starter Housing
In the following step, you need to locate the recoil starter housing. To accomplish the task, figure out the rewind housing and unfasten the engine’s components. It will allow you to approach starter housing.
Unfasten the screws using a screwdriver and take off the housing. The leftover cord will come off along the starter pulley when you take it off.
Step 5. Take Off the Expired Pull Cord
You may take off the old cord by grabbing its broken end, but you need to unlock the rewind housing by knocking the cover. You can get a new pull cord from the nearer market, or you may also prefer to purchase it online.
Step 6. Place the New Cord
You need to place the new cord in your lawn mower in the following step. So to do that, you need to make a knot at the end of the cable and place the new cable in the same way you see the older one.
It would be best to spin the cord accurately over the pulley, ensuring you fix the pull cable. You have to spin the pulley. You can stop spinning when you suspect the resistance.
Step 7. Adjust Pulley & Housing
In the following step, you need to spin(clockwise) the starter pulley; it will require 5 to 6 rotations. You have to be cautious while grabbing the pulley.
You may stop spinning the pulley when you detect the same alignment of the housing pores and the pulley pallets. Place a screwdriver after lining up the recoil starter housing hole along the pulley’s hole. You may use any tool in the holes to stop the pulley from moving in any other way.
Step 8. Wrap The Cord
Insert the cable into the hole and make a knot at the end of the pull cord. It would be best if you heated the cable using the matchbox, or you may also go with a lighter. But don’t forget to make a knot first.
Grab the pull cord firmly and then slightly remove the screwdriver inserted in the holes in the previous step. It will allow the pulley to unroll. Slowly and steadily, the cable will start wrapping up around the pulley.
Don’t lose the grip, and ensure the cord is wrapped firmly over its place. After making everything, like taking off the screwdriver and wrapping the cord over the pulley, if there is extra cord remaining, you may prefer to cut it.
Step 9. Reattach The Components
After completing the steps of installing the new cord, you may now attach the things you have unfastened at the beginning of the procedure.
It includes the rewind housing first. Install it in its accurate spot, place the screws, and tighten the screws firmly. Then you may attach the spark plug cord.
Step 10. Examine Your Mower
After attaching all the things in their accurate positions, you need to examine your machine’s working. Turn the engine on to confirm everything is okay.
Conclusion
We hope these guidelines will help you fix the pull cord of your lawn mower. Most lawnmowers use the exact mechanism to work. So we are sure you can apply the instructions to your mower to change the pull cord.
Follow the instructions carefully. Attach the things back to their accurate position so you can get the prosperous results of your hard work. If you are unsure, don’t hassle yourself and call an expert to tackle your mower pull cord.
Related Guides
- Lawn Mower won’t stay running
- Grass Not Going Into Lawn Mower Bag
- Lawn Mower Smoking After Oil Change
- Troy built lawn mower wont start